STEERING PAD SWITCH > REMOVAL

for Preparation Click here



1. REMOVE HORN BUTTON ASSEMBLY
(Click here)


2. REMOVE STEERING PAD SWITCH ASSEMBLY


    C233344E01

  1. Disconnect the steering pad switch connector from the spiral cable.
    Text in Illustration 
    *1
    		Clamp
    *2
    		Guide

  1. Remove the clamp.

  1. Remove the wire harness from the guide.



    C233346E01

  1. Remove the 2 screws.
    Text in Illustration 
    *1
    		Pin
    *2
    		Guide

  1. Disengage the 2 claws, 2 pins and 2 guides to remove the steering pad switch assembly.