REAR BUMPER > INSTALLATION

for Preparation Click here



1. INSTALL REAR BUMPER ASSEMBLY

  1. w/ LEXUS Parking Assist-sensor System:

    1. Connect the connector.



    B270337

  1. Engage the 4 claws and install the rear bumper assembly as shown in the illustration.



    B270335

  1. Engage the 3 claws as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Install the screw.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Install the 2 screws and 8 clips.



2. INSTALL REAR BUMPER PIECE

  1. Engage the hook.



    B270330

  1. Engage the 2 claws to install the rear bumper piece.

    HINT:
    Use the same procedure for the RH side and LH side.