PARKING ASSIST MONITOR SYSTEM > INITIALIZATION

for Preparation Click here

1. When "System initializing" is displayed on the multi-display, correct the steering angle neutral point using the following method.
   
   

   1. Fully turn the steering wheel to the right and left on flat ground.
      

      NOTICE:

      Memorizing the steering angle neutral point must be carried out with the hybrid system started. Apply the parking brake, depress the brake pedal, push the P position switch, and ensure that the vehicle is not moving.

      HINT:

      The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.