REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE ULTRASONIC SENSOR ASSEMBLY (w/ LEXUS Parking Assist-sensor System)
for Corner Sensor: (Click here)


2. REMOVE ULTRASONIC SENSOR ASSEMBLY (w/ LEXUS Parking Assist-sensor System)
for Back Sensor: (Click here)

HINT:
Use the same procedure for the RH side and LH side.



3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)
for Corner Sensor: (Click here)

HINT:
Use the same procedure for the RH side and LH side.

for Back Sensor: (Click here)

HINT:
Use the same procedure for the RH side and LH side.



4. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    B270338

  1. Disengage the clamp and remove the No. 3 luggage room wire.



5. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    B270340

  1. Remove the screw.

  1. Disengage the guide and remove the reflex reflector assembly LH.



6. REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



7. REMOVE LOWER REAR BUMPER RETAINER LH (for Standard)


    B270339

  1. Disengage the 8 claws and remove the lower rear bumper retainer LH.



8. REMOVE LOWER REAR BUMPER RETAINER RH (for Standard)

HINT:
Use the same procedure as for the LH side.



9. REMOVE REAR BUMPER SIDE RETAINER LH


    B275824

  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper side retainer LH.



10. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



11. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    B270343

  1. Remove the 4 bolts and rear bumper reinforcement sub-assembly.



12. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH


    B270345

  1. Remove the 3 bolts.

  1. Disengage the 2 guides and remove the rear bumper arm sub-assembly LH.



13. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.