REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH


    B270345

  1. Engage the 2 guides.

  1. Install the rear bumper arm sub-assembly LH with the 3 bolts.

    Torque:
    12 N*m{ 117 kgf*cm , 8 ft.*lbf }



2. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    B270343

  1. Install the rear bumper reinforcement sub-assembly with the 4 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }



4. INSTALL REAR BUMPER SIDE RETAINER LH


    B275824

  1. Engage the 3 claws.

  1. Install the rear bumper side retainer LH with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



5. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



6. INSTALL LOWER REAR BUMPER RETAINER LH (for Standard)


    B270339

  1. Engage the 8 claws to install the lower rear bumper retainer LH.



7. INSTALL LOWER REAR BUMPER RETAINER RH (for Standard)

HINT:
Use the same procedure as for the LH side.



8. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    B270340

  1. Engage the guide.

  1. Install the reflex reflector assembly LH with the screw.



9. INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



10. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    B270338

  1. Engage the clamp and install the No. 3 luggage room wire.



11. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)
for Corner Sensor: (Click here)

HINT:
Use the same procedure for the RH side and LH side.

for Back Sensor: (Click here)

HINT:
Use the same procedure for the RH side and LH side.



12. INSTALL ULTRASONIC SENSOR ASSEMBLY (w/ LEXUS Parking Assist-sensor System)
for Corner Sensor: (Click here)


13. INSTALL ULTRASONIC SENSOR ASSEMBLY (w/ LEXUS Parking Assist-sensor System)
for Back Sensor: (Click here)

HINT:
Use the same procedure for the RH side and LH side.