CLEARANCE SONAR MAIN SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY

  1. Engage the 2 claws to install the back sonar or clearance sonar switch assembly.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

  1. Connect each connector.



    B263506

  1. Engage the 8 claws and clip to install the lower instrument panel finish panel sub-assembly.



3. INSTALL INSTRUMENT SIDE PANEL


    B263502

  1. Engage the 4 guides, clip and 3 claws to install the instrument side panel LH.



4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD: (Click here)
for RHD: (Click here)