WASHER NOZZLE (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    E220046E01

  1. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
    Text in Illustration 
    *1
    		Protective Tape

    NOTICE:
    Be careful not to damage the windshield.

    HINT:
    Tape the screwdriver tip before use.



    E220048

  1. Remove the washer nozzle sub-assembly from the washer hose.

    NOTICE:
    Washer nozzles cannot be reused.