2ZR-FXE EMISSION CONTROL > TORQUE SPECIFICATIONS |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Wire harness clamp bracket x EGR valve assembly | 10 | 102 | 7 | |
| EGR valve assembly x EGR cooler sub-assembly | 21 | 214 | 15 | |
| EGR valve with cooler assembly x Cylinder head | 21 | 214 | 15 | |
| EGR valve with cooler assembly x Exhaust manifold | Nut type A | 21 | 214 | 15 |
| Nut type B | 37 | 377 | 27 | |
| Stud bolt x EGR cooler sub-assembly | 5.0 | 51 | 44 in.*lbf | |
| Stud bolt x Cylinder head | 9.5 | 97 | 84 in.*lbf | |
| EGR pipe assembly x EGR valve assembly and Intake manifold | 10 | 102 | 7 | |
| Wire harness support x EGR pipe assembly | 10 | 102 | 7 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Manifold absolute pressure sensor x Intake manifold | 7.0 | 71 | 62 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Purge VSV x Intake manifold | 21 | 214 | 15 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Ventilation valve sub-assembly x No. 1 ventilation case | 20 | 204 | 15 | |
