AIR CONDITIONING AMPLIFIER > REMOVAL

for Preparation Click here



1. REMOVE REAR NO. 2 FLOOR BOARD

  1. Remove the rear No. 2 floor board.



2. REMOVE REAR DECK FLOOR BOX

  1. Remove the rear deck floor box.



3. REMOVE REAR NO. 3 FLOOR BOARD

  1. Remove the rear No. 3 floor board.



4. REMOVE DECK FLOOR BOX RH


    B270546

  1. Remove the clip.

  1. Disengage the 6 guides and remove the deck floor box RH.



5. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE


    B270547

  1. Disengage the 4 claws and 2 guides, and remove the rear floor board upper No. 3 plate.



6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



7. REMOVE CONSOLE BOX INSERT


    B269943

  1. Disengage the 2 clips and 2 claws, and remove the console box insert.



8. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    E189043

  1. Disconnect each connector and remove the screw.



    E189045

  1. Disengage the guide as shown in the illustration.



    E189047

  1. Disengage the guide and remove the air conditioning amplifier assembly as shown in the illustration.