PERSONAL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL MAP LIGHT BULB

  1. Install the 2 map light bulbs to the 2 map light sockets.



    E220656

  1. Turn the 2 map light bulbs with the 2 map light sockets in the direction indicated by the arrows in the illustration and install them as a unit.



2. INSTALL MAP LIGHT ASSEMBLY

  1. Connect the connector.



    E223659E01

  1. Engage the 3 guides and 4 clips to install the map light assembly as shown in the illustration.

  1. Close the overhead console.