PERSONAL LIGHT > REMOVAL

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY

  1. Open the overhead console.



    E220652E01

  1. Disengage the 4 clips and 3 guides as shown in the illustration.

  1. Disconnect the connector and remove the map light assembly.



2. REMOVE MAP LIGHT BULB


    E220655

  1. Turn the 2 map light bulbs with the 2 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

  1. Remove the 2 map light bulbs from the 2 map light sockets.