FRONT DOOR COURTESY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE


    B270515

  1. Disengage the 4 claws, 2 guides and 4 clips, and remove the front door scuff plate LH.



2. REMOVE REAR DOOR SCUFF PLATE


    B270519

  1. Disengage the 4 claws, 2 guides and 2 clips, and remove the rear door scuff plate LH.



3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

  1. Remove the front door opening trim weatherstrip LH.

  1. Remove the residual weatherstrip sealant from the body of the vehicle using cleaner.

    NOTICE:
    Remove the sealant completely. Any residual sealant may transfer to other areas of the vehicle when removing/installing the interior parts.



4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

  1. Remove the rear door opening trim weatherstrip LH.

  1. Remove the residual weatherstrip sealant from the body of the vehicle using cleaner.

    NOTICE:
    Remove the sealant completely. Any residual sealant may transfer to other areas of the vehicle when removing/installing the interior parts.



5. REMOVE LAP BELT OUTER ANCHOR COVER


    B265187

  1. Disengage the 3 claws and remove the lap belt outer anchor cover.



6. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY


    B265188

  1. Remove the bolt and disconnect the floor end of the front seat outer belt assembly.



7. REMOVE CENTER PILLAR LOWER GARNISH


    B270537

  1. Disengage the 4 claws and 2 clips, and remove the center pillar lower garnish LH.



8. REMOVE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

  1. Disconnect the connector.



    E219719

  1. Using a T30 "TORX" socket wrench, remove the bolt and front door courtesy light switch assembly.