LICENSE PLATE LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
(Click here)


2. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    E219710

  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the license plate light assembly.



3. REMOVE LICENSE PLATE LIGHT BULB


    E219711

  1. Turn the license plate light bulb and license plate light socket plug in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

  1. Remove the license plate light bulb from the license plate light socket plug.