STOP LIGHT SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    B269941

  1. Remove the 2 screws <E>.

  1. Disengage the clip.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    B269942

  1. Remove the screw <E>.

  1. Disengage the 2 clips.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



3. REMOVE STOP LIGHT SWITCH ASSEMBLY


    E220328

  1. Disconnect the connector.



    E220330

  1. Turn the stop light switch assembly counterclockwise and remove it.