TURN SIGNAL FLASHER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for LHD)

  1. Connect the connector.



    E220342

  1. Engage the claw to install the turn signal flasher assembly.

  1. Engage the pin and connect the connector holder.

  1. Install the bolt.



2. INSTALL TURN SIGNAL FLASHER ASSEMBLY (for RHD)


    E221394

  1. Connect the connector.

  1. Engage the claw to install the turn signal flasher assembly.



3. INSTALL POWER STEERING ECU ASSEMBLY (for LHD)
(Click here)


4. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY (for RHD)

HINT:
Use the same procedure for the RH side and LH side (Click here).