STOP LIGHT CONTROL RELAY > INSTALLATION

for Preparation Click here



1. INSTALL STOP LIGHT CONTROL ECU ASSEMBLY (for LHD)

  1. Connect the connector.

  1. Engage the clamp to install the stop light control ECU assembly.



2. INSTALL STOP LIGHT CONTROL ECU ASSEMBLY (for RHD)

  1. Connect the connector.

  1. Engage the clamp to install the stop light control ECU assembly.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

  1. Connect each connector.



    B263506

  1. Engage the 8 claws and clip to install the lower instrument panel finish panel sub-assembly.



4. INSTALL INSTRUMENT SIDE PANEL


    B263502

  1. Engage the 4 guides, clip and 3 claws to install the instrument side panel LH.



5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD: (Click here)
for RHD: (Click here)


6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

  1. Connect each connector.

  1. Engage the clamp.

  1. Engage the clip.

  1. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E>.



7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

  1. Connect each connector.

  1. Engage the clamp.

  1. Engage the 2 clips.

  1. Install the No. 1 instrument panel under cover sub-assembly with the screw <E>.