WIPER ECU > REMOVAL

for Preparation Click here



1. REMOVE NO.2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    B269873

  1. Disengage the 2 clips, claw and guide.

  1. Disengage the clamp.

  1. Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.



2. REMOVE NO.2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    B270055

  1. Disengage the 2 clips, claw and 2 guides.

  1. Disengage the clamp.

  1. Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.



3. REMOVE FRONT CONSOLE BOX
(Click here)


4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B269927

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



5. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    B269931

  1. Disengage the 6 claws and 2 guides.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the integration control and panel assembly.



6. REMOVE CONSOLE BOX INSERT


    B269943

  1. Disengage the 2 clips and 2 claws, and remove the console box insert.



7. REMOVE CONSOLE BOX LH


    B269945

  1. Remove the bolt <A>.

  1. Using a clip remover, remove the clip.

  1. Using a clip remover, disengage the 3 clips.

  1. Disengage the 2 claws and guide, and remove the console box LH.



8. REMOVE FRONT NO.2 CONSOLE BOX INSERT


    B269947

  1. Disengage the 5 claws and remove the front No. 2 console box insert.



9. REMOVE CONSOLE BOX RH


    B269949

  1. Remove the bolt <A>.

  1. Using a clip remover, remove the clip.

  1. Using a clip remover, disengage the 3 clips.

  1. Disengage the 2 claws and guide, and remove the console box RH.



10. REMOVE NO. 3 CONSOLE BOX MOUNTING BRACKET


    B269951E01

  1. Disengage the clamp.
    Text in Illustration 
    *1
    		Clamp
    *2
    		Guide

  1. Remove the 4 bolts <A>.

  1. Disengage the 3 guides and remove the No. 3 console box mounting bracket.



11. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    B269953E01

  1. Disengage each clamp.
    Text in Illustration 
    *1
    		Clamp
    *2
    		Guide

  1. Remove the 2 bolts <A>.

  1. Disengage the 2 guides and remove the No. 1 console box mounting bracket.



12. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY


    E220193

  1. Disconnect the connector.

  1. Remove the bolt and windshield wiper relay assembly.