REAR LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR LIGHT GASKET


    E219183

  1. Remove the rear light gasket.

    NOTICE:
    1. Be sure to remove all the traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.



2. REMOVE BACK-UP LIGHT BULB (w/o Rear Fog Light)


    E219184

  1. Turn the back-up light bulb and rear light socket and wire in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the back-up light bulb from the rear light socket and wire.



3. REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)


    E222526

  1. Turn the No. 1 rear fog light bulb and rear light socket and wire in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the No. 1 rear fog light bulb from the rear light socket and wire.