AUDIO AND VISUAL SYSTEM (w/o Navigation System) > Portable Player cannot be Connected Manually/Automatically

for Preparation Click here


INSPECTION PROCEDURE

HINT:
  1. Some versions of "Bluetooth" compatible audio players may not function, or the function may be limited using the radio receiver assembly, even if the portable audio player itself can play files (Click here).
  1. Refer to the owner's manual for the operating procedure.

1.CHECK CONNECTED DEVICE SETTINGS

  1. Check if the portable player is registered as a connected device.

    NOTICE:
    If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

    Result:
    Result
    		Proceed to
    The portable player is registered as a connected device.
    		A
    The portable player is not registered as a connected device.
    		B



B
REGISTER PORTABLE PLAYER AS CONNECTED DEVICE
A


2.CHECK SYMPTOMS

  1. Check the connection condition between the portable player and radio receiver assembly.

    HINT:
    The portable player cannot be connected when any of the following conditions are met:
    1. The portable player is connected to another device.
    2. The portable player is connected to the radio receiver assembly using the hands-free function.
    3. The radio receiver assembly has cleared the portable player registration.
    4. The portable player is off.

    Result:
    Result
    		Proceed to
    The portable player cannot be connected automatically.
    		A
    The portable player cannot be connected manually.
    		B



B
Go to step 4
A


3.CHECK AUTOMATIC CONNECTION SETTINGS

  1. Check the automatic connection settings of the "Bluetooth" audio.

    1. Turn the power switch off.

    2. Turn the power switch on (ACC) or (IG).

      OK:
      The portable player is automatically recognized by the radio receiver assembly.



NG
CHANGE SETTING TO ALLOW PORTABLE PLAYER TO BE RECOGNIZED BY RADIO RECEIVER ASSEMBLY
OK


4.CHECK PORTABLE PLAYER STATUS

  1. Check the status of the portable player.

    1. Check that the portable player is not in standby mode.

    2. Check that the portable player is not connected to another device (headphones etc.).

      OK:
      The portable player is not in standby mode and not connected to another device (headphones etc.).



NG
TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)
OK


5.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

  1. Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

    OK:
    The portable player can be connected manually/automatically.



NG
PORTABLE PLAYER IS NOT COMPATIBLE
OK


6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

  1. Remove additional devices which use radio waves.

  1. Check if the portable player can be connected manually/automatically.

    OK:
    The portable player can be connected manually/automatically.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END