REAR STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE REAR SUSPENSION MEMBER BRACE LH


    C232807

  1. Remove the 3 bolts and rear suspension member brace LH from the rear suspension member sub-assembly.



2. REMOVE REAR SUSPENSION MEMBER BRACE RH

HINT:
Perform the same procedure as the LH side.



3. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    C211883

  1. Remove the nut (A) and separate the rear stabilizer link assembly LH from the rear stabilizer bar.
    Text in Illustration 
    V100135
    		Nut (A)
    V100136
    		Nut (B)

    HINT:
    If the ball joint turns together with the nut, use a hexagon socket wrench to hold the stud bolt.

  1. Remove the nut (B), rear stabilizer link assembly LH and 2 rear stabilizer cushions.



4. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT:
Perform the same procedure as the LH side.



5. REMOVE REAR STABILIZER BAR


    C234400

  1. Remove the 4 bolts, rear stabilizer bar, 2 rear stabilizer bushings and rear No. 1 stabilizer bar bracket from the rear suspension member sub-assembly.



6. REMOVE REAR NO. 1 STABILIZER BAR BRACKET

  1. Remove the rear No. 1 stabilizer bar bracket from the rear stabilizer bushing.



7. REMOVE REAR STABILIZER BUSHING

  1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.