MULTI-MEDIA INTERFACE ECU > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET

  1. Install the No. 2 multi-media interface bracket with the 2 bolts.



2. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET

  1. Install the No. 1 multi-media interface bracket with the 2 bolts.



3. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY

  1. Connect each connector.

  1. Engage the guide and install the multi-media interface ECU assembly with the bolt.



4. INSTALL REAR CONSOLE BOX ASSEMBLY
(Click here)