MULTI-DISPLAY > INSTALLATION

for Preparation Click here



1. INSTALL MULTI-DISPLAY SUB-ASSEMBLY

  1. Connect earth connector.

  1. Engage the clamp.



    E223117

  1. Engage the 2 clips as shown in the illustration.

  1. Install the multi-display sub-assembly with the 2 screws.

  1. Engage the 4 guides.

  1. Connect the 5 claws to install the instrument panel finish panel end.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B269898

  1. Engage the 16 claws to install the instrument cluster finish panel sub-assembly.



3. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

  1. Connect the connector.



    B269894

  1. Engage the 3 guides and 8 claws to install the center instrument panel register assembly.