NAVIGATION ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION ANTENNA ASSEMBLY (for LHD)

  1. Engage the 6 clamps.

  1. Install the navigation antenna assembly with the 3 screws.



2. INSTALL NAVIGATION ANTENNA ASSEMBLY (for RHD)

  1. Engage the 5 clamps.

  1. Install the navigation antenna assembly with the 3 screws.



3. INSTALL DEFROSTER NOZZLE ASSEMBLY


    B269911

  1. Install the defroster nozzle assembly with the 3 screws <B>.



4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    B269909

  1. Engage the claw.

  1. Install the No. 1 heater to register duct sub-assembly with the 3 screws <B>.



5. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

HINT:
Use the same procedure described for the No. 1 heater to register duct sub-assembly.



6. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
(Click here)