REMOTE TOUCH > REASSEMBLY

for Preparation Click here



1. INSTALL INTEGRATION PANEL SUB-ASSEMBLY


2. INSTALL COVER ASSEMBLY LH


    E220516

  1. Engage the 2 clips to install the cover assembly LH.



3. INSTALL DOME COVER


    E220508

  1. Install the dome cover as shown in the illustration.



4. INSTALL REMOTE OPERATION BOARD


    E220506

  1. Connect the connector.



    E220505

  1. Install the 3 screws.



    E220504

  1. Install the 3 screws to install the remote operation board.



5. INSTALL SWITCH KNOB


    E220503

  1. Install the switch knob as shown in the illustration.