DTC    B15AF    Remote Touch Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the remote touch.

DTC No.
DTC Detection Condition
Trouble Area
B15AF
Internal hardware malfunction
Remote touch (remote operation board)

INSPECTION PROCEDURE

1.CHECK DTC

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTCs are output again.

    OK:
    No DTCs are output.



NG
REPLACE REMOTE OPERATION BOARD (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)