NAVIGATION SYSTEM (for HDD) > Pointer Displayed/not Displayed Repeatedly

for Preparation Click here


INSPECTION PROCEDURE

1.CONFIRM SYMPTOMS

  1. Recheck the situation when the malfunction occurs.

    HINT:
    1. When a user lays their hand on the remote touch switch knob, the pointer may be displayed and hidden repeatedly according to the knob movement.
    2. When driving on a rough road where the vehicle lurches or shakes around due to the bumps, the remote touch switch knob may move unexpectedly as a result.

    Result:
    Result
    		Proceed to
    Symptom occurs in any situation.
    		A
    Symptom occurs when hand is rested on the remote touch switch knob while driving.
    		B
    Symptom occurs when driving on a rough road that causes the vehicle to lurch or shake around.
    		B



B
END
A


2.CHECK FOREIGN OBJECT

  1. Check if there are any foreign objects around the remote touch switch knob that interfere with knob operation.

    OK:
    There are no foreign objects around the remote touch switch knob that interfere with its operation.



NG
REMOVE FOREIGN OBJECT (CHECK KNOB OPERATION AGAIN AFTER REMOVING OBJECT)
OK

USE SIMULATION METHOD TO CHECK (Click here)