FRONT DRIVE SHAFT ASSEMBLY > REMOVAL > Preparation
 | 09520-00031 | Rear Axle Shaft Puller |
 | 09520-01010 | Drive Shaft Remover Attachment |
 | 09930-00010 | Drive Shaft Nut Chisel |
 | 09960-20010 | Ball Joint Puller Set |
 | (09961-02010) | Assy Ball Joint Puller |
 | (09961-02060) | Spacer B |
| Torque wrench | - |
| Protective tape | - |
| Protective glove | - |
| Item | Capacity |
| Front drive shaft outboard joint grease | 135 to 145 g (4.8 to 5.1 oz.) |
| Front drive shaft inboard joint grease | 168 to 178 g (5.9 to 6.2 oz.) |
 | 09012-2C540 | Deep Socket Wrench 30mm | - |
 | 09042-1C500 | Water Pump Pliers | - |
 | 09051-1C110 | Plastic Hammer | - |
 | 09905-00012 | Snap Ring No. 1 Expander | - |