OIL PUMP > REMOVAL > Preparation
 | 09213-58014 | Crankshaft Pulley Holding Tool |
 | (91551-80840) | Bolt |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05020) | Center Bolt 150 |
 | (09954-05021) | Claw No. 2 |
| 27 mm socket wrench | - |
| 24 mm deep socket wrench | - |
| Ohmmeter | - |
| Oil pressure gauge | - |
| Precision straight edge | - |
| Torque wrench | - |
| Protective tape | - |
| Wooden block | - |
| Feeler gauge | - |
| Oil Grade | Oil Viscosity (SAE) |
| API grade SL "Energy-Conserving ", SM "Energy-Conserving" or ILSAC multigrade engine oil | 0W-20 5W-20 5W-30 10W-30 |
| API grade SL or SM multigrade engine oil | 15W-40 20W-50 |
| Item | Standard Condition |
| Drain and refill with oil filter change | 4.2 liters (4.4 US qts, 3.7 lmp. qts) |
| Drain and refill without oil filter change | 3.9 liters (4.1 US qts, 3.4 lmp. qts) |
| Dry fill | 4.7 liters (5.0 US qts, 4.1 lmp. qts) |
 | 09091-1C100 | Oil Pan Seal Cutter | - |
| Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent | - |
| Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent | - |
| Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent | - |