OIL PRESSURE SWITCH > INSTALLATION > Preparation
|  |
|
EQUIPMENT27 mm socket wrench
| -
| 24 mm deep socket wrench
| -
| Ohmmeter
| -
| Oil pressure gauge
| -
| Precision straight edge
| -
| Torque wrench
| -
| Protective tape
| -
| Wooden block
| -
| Feeler gauge
| -
| |
|
LUBRICANT / Standard Oil GradeOil Grade
| Oil Viscosity (SAE)
| API grade SL "Energy-Conserving ", SM "Energy-Conserving" or ILSAC multigrade engine oil
|
0W-20
5W-20
5W-30
10W-30
| API grade SL or SM multigrade engine oil
|
15W-40
20W-50
|
LUBRICANT / Standard CapacityItem
| Standard Condition
| Drain and refill with oil filter change
| 4.2 liters (4.4 US qts, 3.7 lmp. qts)
| Drain and refill without oil filter change
| 3.9 liters (4.1 US qts, 3.4 lmp. qts)
| Dry fill
| 4.7 liters (5.0 US qts, 4.1 lmp. qts)
| |
|
RECOMMENDED TOOLS
| 09091-1C100
| Oil Pan Seal Cutter
| -
| |
|
SSMToyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
| -
| Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
| -
| Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
| -
| |
|