FRONT DOOR BELT MOULDING > COMPONENTS > Preparation
| Clip remover | |
| Protective tape | |
| Heat light | |
| Cutter or other similar tool | |
| Torque wrench | |
| Double-sided tape | |
| Drill | |
| 4 mm (0.16 in.) Drill bit | |
| Tape | |
| Vacuum cleaner | |
| Rivet | |
| Hand riveter | |
| Squeegee | |
| Brush | |
| Container | |
| String | |
| Masking Tape | |
| Wooden block or similar object | |
| Piano wire |
 | 09013-7C400 | Wrench Set | |
 | 09050-00032 | Air Drill | |
 | 09050-02050 | Nose Piece No.4 | |
 | 09050-20010 | Air Riveter | |
 | 09061-1C300 | Set, Moulding Remover | |
 | (09061-1C340) | Remover D, Moulding |
| Adhesive, 3M DP-105 or equivalent | - |