THEFT DETERRENT > GENERAL



OUTLINE

  1. The theft deterrent system can sound an alarm when any of the following activities are detected:

    1. The vehicle is being forcibly entered.
    2. The engine hood is being opened.
    3. Any door is being unlocked without the key.
    4. A battery terminal is disconnected and reconnected.
    5. Any moving object is detected in the interior.
    6. The pitch angle of the vehicle inclination is changed.*
    7. Open circuit is detected in print pattern type glass breakage sensor.*

  2. The system consists of door lock control system parts, entry and start system parts, intrusion sensor, tilt sensor (yawrate sensor)*, glass breakage sensor*, a theft warning siren assembly and a security indicator light.

  3. The system is controlled by the main body ECU (multiplex network body ECU).
    *: Destination package for United Kingdom.


SPECIFICATION

  1. The warning specifications of this system are listed below.

    Warning Method
    		Hazard Warning Lights
    		Blink
    Vehicle Horn
    		Sounds a warning on a 0.4 second cycle (approximately)
    Theft Warning Siren Assembly*
    		Sounds a warning on a 0.4 second cycle (approximately)
    Door Lock Motors
    		Lock
    Warning Time
    		Approximately 27.5 seconds
    *: Models for Europe