MIRROR SYSTEM > DETAILS

OPERATING CONDITION

Automatic Retract Function*1
1. This function operates when both of the following conditions are met:
  1. When this function has been enabled using the retract outer mirror switch.
  2. When the doors are locked or unlocked using the entry function, or the doors are locked or unlocked using the transmitter (key).*2
Reverse-linked Function*1
1. This function operates when all of the following conditions are met:
  1. The power switch is on (IG).
  2. When either the R or L position of the mirror select switch has been selected.
  3. The shift lever is moved to R.
Mirror Heater Function
1. The mirror heaters are activated when the power switch is on (IG), and the rear defogger switch is pushed. The air conditioning amplifier assembly keeps the mirror heaters on for approximately 15 minutes.
Foot Light Function
1. This function operates when any of the following conditions are met:
  1. When the user approaches either front door, and a smart key confirmation occurs.
  2. When the doors are unlocked using the wireless door unlock function.
  3. When the doors are unlocked manually from within the cabin with the power switch on (IG) and park (P) selected.
Automatic Glare-resistant (EC) Dimming Function*1
1. This function operates when both of the following conditions are met:
  1. When the AUTO switch of the inside rear view mirror is pushed to select AUTO mode (When the power switch is turned from off to on (IG), this system defaults to AUTO mode).
  2. When the inside rear view mirror detects a large difference in brightness of the surroundings and also the headlights of a following car.
Memory System* (mirror surface position memory function)
1. This function operates when any of the following conditions are met:
  1. When the memory switch is operated with the power switch on (IG), park (P) selected and the mirror position stored in the memory system.
  2. When the memory switch is operated within approximately 180 seconds after opening the driver side door with the power switch off and the mirror position stored in the memory system.
  3. When the memory switch is operated within approximately 60 seconds after closing the driver side door with the power switch off and the mirror position stored in the memory system.
  4. With the power switch off, driver door closed and the key ID registration of the memory call function complete, the doors are unlocked using the smart access function or wireless door unlock function and then the driver door is opened.

*1: Models with memory function
*2: Default setting (Operation can be customized to retract and return the mirrors when the power switch is turned on (ACC) or off.)

FUNCTION

The outside rear view mirrors have the following functions:

Function
Outline
Electric Remote Mirrors
Remote Control Function
The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch assembly.
Automatic Retractable Function*1
This function automatically synchronizes retracting and returning the outside rear view mirrors with locking and unlocking the doors using the entry lock/unlock function and wireless door lock/unlock function.*2
Reverse-linked Function*1
This function tilts the mirror surface downward to improve visibility when reversing.
Mirror Heater Function
The mirror heaters use a heater element in both outside rear view mirrors to help defog them.
The mirror heaters are controlled by the air conditioning amplifier assembly.
Foot Light Function
This function illuminates the area around the doors in conjunction with the illuminated entry system operation.
Automatic Glare-resistant Electrochromic (EC) Dimming Function*1
During nighttime driving, if a large difference in intensity exists between the surrounding light and the light reflected off the inside rear view mirror from the headlights behind, an automatic glare-resistant Electrochromic (EC) mirror automatically reduces the reflection rate of the inside or outside rear view mirrors and thus dampens the glare from the mirror.
Memory System*1
The memory system can store the driver seat, outside rear view mirror positions and tilt & telescopic steering positions. Up to 3 memory positions can be stored in the system memory and recalled.
*1: Models with memory function
*2: Default setting (Operation can be customized to retract and return the mirrors when the power switch is turned on (ACC) or off.)

Function		Outline
Electric Remote Mirrors	Remote Control Function	The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch assembly.
	Automatic Retractable Function*1	This function automatically synchronizes retracting and returning the outside rear view mirrors with locking and unlocking the doors using the entry lock/unlock function and wireless door lock/unlock function.*2
	Reverse-linked Function*1	This function tilts the mirror surface downward to improve visibility when reversing.
Mirror Heater Function		The mirror heaters use a heater element in both outside rear view mirrors to help defog them. The mirror heaters are controlled by the air conditioning amplifier assembly.
Foot Light Function		This function illuminates the area around the doors in conjunction with the illuminated entry system operation.
Automatic Glare-resistant Electrochromic (EC) Dimming Function*1		During nighttime driving, if a large difference in intensity exists between the surrounding light and the light reflected off the inside rear view mirror from the headlights behind, an automatic glare-resistant Electrochromic (EC) mirror automatically reduces the reflection rate of the inside or outside rear view mirrors and thus dampens the glare from the mirror.
Memory System*1		The memory system can store the driver seat, outside rear view mirror positions and tilt & telescopic steering positions. Up to 3 memory positions can be stored in the system memory and recalled.