Home › Drivetrain › P410 HYBRID TRANSMISSION / TRANSAXLE › ELECTRONIC SHIFT LEVER SYSTEM

DTC    C2308    EEPROM Malfunction

for Preparation Click here


DESCRIPTION

The transmission control ECU assembly monitors its internal operation and it will store this DTC when it detects an EEPROM malfunction. If this DTC is output, replace the transmission control ECU assembly.

DTC No.
DTC Detection Condition
Trouble Area
C2308
EEPROM malfunction
Transmission control ECU assembly

INSPECTION PROCEDURE

1.REPLACE TRANSMISSION CONTROL ECU ASSEMBLY

  1. Replace the transmission control ECU assembly (Click here).


NEXT

END