Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER

REAR SPOILER > REASSEMBLY

for Preparation Click here



1. INSTALL CENTER STOP LIGHT ASSEMBLY

  1. Connect the connector.

  1. Install the center stop light assembly with the 2 screws to the rear spoiler assembly.



2. INSTALL NO. 1 REAR SPOILER COVER


    E219738

  1. Engage the 4 claws to install the 2 rear No. 1 spoiler covers.



3. INSTALL NO. 4 REAR SPOILER PROTECTOR

  1. Wipe off any tape adhesive residue with cleaner.

  1. Remove the release paper from 2 new rear No. 3 spoiler protectors.



  1. Install the 6 new No. 4 rear spoiler protectors to the rear spoiler sub-assembly.


    B270351



4. INSTALL NO. 3 REAR SPOILER PROTECTOR

  1. Wipe off any tape adhesive residue with cleaner.

  1. Remove the release paper from 2 new rear No. 3 spoiler protectors.



  1. Install the 2 new No. 3 rear spoiler protectors to the rear spoiler sub-assembly.


    B270350



5. INSTALL NO. 1 REAR SPOILER PROTECTOR

  1. Wipe off any tape adhesive residue with cleaner.

  1. Remove the release paper from 2 new rear No. 3 spoiler protectors.



    B270349

  1. Install the new No. 4 rear spoiler protector to the rear spoiler sub-assembly.