Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR GLASS

OUTER REAR VIEW MIRROR GLASS > INSPECTION

for Preparation Click here



1. INSPECT OUTER MIRROR RH


    B273334E01

  1. Remove the outer mirror RH (Click here).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		25°C (77°F)
    		7.6 to 11.4 Ω

    Text in Illustration 
    *a
    		Component without harness connected
    (Outer Mirror RH)
    If the result is not as specified, replace the outer mirror RH.



2. INSPECT OUTER MIRROR LH


    B273167E01

  1. Remove the outer mirror LH (Click here).

  1. Measure the resistance according the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		25°C (77°F)
    		7.6 to 11.4 Ω

    Text in Illustration 
    *a
    		Component without harness connected
    (Outer Mirror LH)
    If the result is not as specified, replace the outer mirror LH.