Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function(s) can be customized.
  2. Be sure to make notes of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the intelligent tester

    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Power Window.

    5. Select the setting by referring to the table below.

      Power Window 
      Tester Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Door Key P/W Up
      		OFF
      		This function is used to close the windows by operating the mechanical key.
      		ON/OFF
      		Main body ECU (Multiplex network body ECU)
      Door Key P/W Down
      		OFF
      		This function is used to open the windows by operating the mechanical key.
      		ON/OFF
      		Main body ECU (Multiplex network body ECU)
      P/W Up w/ Transmitter
      		OFF
      		This function is used to close the windows using the wireless key transmitter.
      		ON/OFF
      		Main body ECU (Multiplex network body ECU)
      P/W Down w/ Transmitter
      		OFF
      		This function is used to open the windows using the wireless key transmitter.
      		ON/OFF
      		Main body ECU (Multiplex network body ECU)
      P Window Auto Up
      		Avail
      		This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side).
      		Avail/Not Avl
      		Power window ECU (Power window regulator motor assembly)
      P Window Auto Up From Driver
      		Avail
      		This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly.
      		Avail/Not Avl
      		Power window ECU (Power window regulator motor assembly)
      RR Window Auto Up
      		Avail
      		This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH side).
      		Avail/Not Avl
      		Power window ECU (Power window regulator motor assembly)
      RR Window Auto Up From Driver
      		Avail
      		This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly.
      		Avail/Not Avl
      		Power window ECU (Power window regulator motor assembly)
      RL Window Auto Up
      		Avail
      		This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH side).
      		Avail/Not Avl
      		Power window ECU (Power window regulator motor assembly)
      RL Window Auto Up From Driver
      		Avail
      		This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly.
      		Avail/Not Avl
      		Power window ECU (Power window regulator motor assembly)