Home › BRAKE › BRAKE CONTROL › ELECTRONICALLY CONTROLLED BRAKE SYSTEM

DTC    C1300    Skid Control ECU Malfunction

for Preparation Click here


DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self-diagnosis.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
C1300
-
Malfunction in the skid control ECU
Skid control ECU

INSPECTION PROCEDURE

NOTICE:
When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration (Click here).

1.REPLACE SKID CONTROL ECU

  1. Replace the skid control ECU (Click here).


NEXT

PERFORM TEST MODE (SIGNAL CHECK)