REAR DIFFERENTIAL CARRIER ASSEMBLY (for 3GR-FSE) > DISASSEMBLY

1. REMOVE NO.1 REAR DIFFERENTIAL MOUNT CUSHION

2. REMOVE NO.2 REAR DIFFERENTIAL MOUNT CUSHION

3. REMOVE REAR DIFFERENTIAL BREATHER PLUG

4. REMOVE REAR DIFFERENTIAL CARRIER COVER

5. REMOVE REAR DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR

6. FIX REAR DIFFERENTIAL CARRIER

7. INSPECT RUNOUT OF DIFFERENTIAL RING GEAR

8. INSPECT DIFFERENTIAL RING GEAR BACKLASH

9. INSPECT REAR DIFFERENTIAL SIDE GEAR BACKLASH

10. INSPECT RUNOUT OF REAR DRIVE PINION COMPANION FLANGE

11. INSPECT TOTAL PRELOAD

12. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

13. REMOVE REAR DRIVE PINION NUT

14. REMOVE REAR DRIVE PINION COMPANION FLANGE

15. REMOVE REAR DIFFERENTIAL DUST DEFLECTOR

16. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL

17. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

18. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING

19. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER

20. REMOVE REAR DIFFERENTIAL CASE

21. REMOVE DIFFERENTIAL DRIVE PINION

22. REMOVE REAR DRIVE PINION REAR TAPERED ROLLER BEARING

23. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING

24. REMOVE REAR DRIVE PINION REAR TAPERED ROLLER BEARING

25. REMOVE DIFFERENTIAL RING GEAR

26. INSPECT RUNOUT OF DIFFERENTIAL CASE ASSEMBLY

27. REMOVE REAR DIFFERENTIAL CASE BEARING

28. REMOVE REAR DIFFERENTIAL PINION SHAFT PIN

29. INSPECT DIFFERENTIAL PINION AND SIDE GEAR

30. INSPECT REAR DIFFERENTIAL CASE