AUTOMATIC TRANSMISSION ASSEMBLY > INSTALLATION

1. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY

2. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY

3. INSTALL TRANSMISSION CONTROL SHAFT LEVER RH

4. INSTALL ENGINE MOUNTING INSULATOR REAR NO.1

5. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

6. INSTALL FLYWHEEL HOUSING UNDER COVER

7. INSTALL WIRE HARNESS AND CONNECTORS

8. INSTALL ENGINE REAR MOUNTING MEMBER

9. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

10. INSTALL OIL COOLER OUTLET TUBE NO.1

11. INSTALL OIL COOLER INLET TUBE NO.1

12. ADJUST SHIFT LEVER POSITION

13. INSPECT SHIFT LEVER POSITION

14. INSTALL PROPELLER W/CENTER BEARING SHAFT ASSEMBLY

15. INSTALL EXHAUST PIPE NO.1 SUPPORT BRACKET SUB-ASSEMBLY

16. INSTALL FRONT EXHAUST PIPE ASSEMBLY

17. INSTALL ENGINE UNDER COVER AIR GUIDE BRACKET

18. ADD AUTOMATIC TRANSMISSION FLUID

19. INSTALL ENGINE UNDER COVER NO.2

20. INSTALL ENGINE UNDER COVER

21. RESET MEMORY

22. PERFORM INITIALIZATION