FLOOR SHIFT ASSEMBLY > INSTALLATION

1. INSTALL FLOOR SHIFT ASSEMBLY

2. INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

3. ADJUST SHIFT LEVER POSITION

4. INSPECT SHIFT LEVER POSITION

5. INSTALL FRONT FLOOR HEAT INSULATOR NO.1

6. INSTALL EXHAUST PIPE ASSEMBLY FRONT

7. INSTALL ENGINE UNDER COVER NO.2

8. INSTALL NO.2 CONSOLE BOX DUCT

9. INSTALL CONSOLE BOX

10. INSTALL CONSOLE BOX REGISTER ASSEMBLY

11. REMOVE CONSOLE BOX PLATE

12. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

13. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

14. INSTALL CONSOLE UPPER PANEL ASSEMBLY

15. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

17. PERFORM INITIALIZATION