FLOOR SHIFT ASSEMBLY > REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

  6. REMOVE CONSOLE BOX PLATE

  7. REMOVE CONSOLE BOX REGISTER ASSEMBLY

  8. REMOVE CONSOLE BOX

  9. REMOVE NO.2 CONSOLE BOX DUCT

  10. REMOVE FRONT EXHAUST PIPE ASSEMBLY

  11. REMOVE FRONT FLOOR HEAT INSULATOR NO.1

  12. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

  13. REMOVE FLOOR SHIFT ASSEMBLY