CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)

3. INSTALL INTAKE AIR SURGE TANK

4. CONNECT VENTILATION HOSE

5. INSTALL ENGINE REAR COVER

6. CONNECT HEATER WATER INLET HOSE

7. CONNECT UNION TO CHECK VALVE HOSE

8. CONNECT WATER BY-PASS HOSE

9. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

10. CONNECT NO. 2 VENTILATION HOSE

11. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side)

12. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side)

13. ADD ENGINE COOLANT

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

15. CHECK FOR ENGINE COOLANT LEAKS

16. INSTALL ENGINE UNDER COVER

17. INSTALL ENGINE ROOM SIDE COVER RH

18. INSTALL COOL AIR INTAKE DUCT SEAL

19. INSTALL V-BANK COVER

20. PERFORM INITIALIZATION

21. DRIVING TEST