ENGINE COOLANT TEMPERATURE SENSOR > INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

2. INSTALL INTAKE MANIFOLD

3. INSTALL INTAKE AIR SURGE TANK

4. CONNECT FUEL MAIN TUBE

5. CONNECT VENTILATION HOSE

6. CONNECT UNION TO CHECK VALVE HOSE

7. CONNECT WATER BY-PASS HOSE

8. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

9. CONNECT NO. 2 VENTILATION HOSE

10. ADD ENGINE COOLANT

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. CHECK FOR ENGINE COOLANT LEAKS

13. CHECK FUNCTION OF THROTTLE BODY

14. INSTALL V-BANK COVER

15. INSTALL ENGINE ROOM SIDE COVER RH

16. INSTALL COOL AIR INTAKE DUCT SEAL

17. INSTALL ENGINE UNDER COVER

18. PERFORM INITIALIZATION

19. WARM UP ENGINE