THROTTLE BODY > INSTALLATION

1. INSTALL THROTTLE BODY

2. CONNECT WATER BY-PASS HOSE

3. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

4. CONNECT NO. 2 VENTILATION HOSE

5. ADD ENGINE COOLANT

6. CHECK FOR ENGINE COOLANT LEAKS

7. INSTALL ENGINE UNDER COVER

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. CHECK FUNCTION OF THROTTLE BODY

10. INSTALL V-BANK COVER

11. INSTALL ENGINE ROOM SIDE COVER RH

12. INSTALL COOL AIR INTAKE DUCT SEAL

13. PERFORM INITIALIZATION

14. WARM UP ENGINE