FUEL INJECTOR > REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE COOL AIR INTAKE DUCT SEAL

4. REMOVE ENGINE UNDER COVER

5. DRAIN ENGINE COOLANT

6. REMOVE ENGINE ROOM SIDE COVER RH

7. REMOVE V-BANK COVER

8. REMOVE NO. 2 VENTILATION HOSE

9. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

10. REMOVE WATER BY-PASS HOSE

11. DISCONNECT UNION TO CHECK VALVE HOSE

12. DISCONNECT VENTILATION HOSE

13. DISCONNECT FUEL MAIN TUBE

14. REMOVE INTAKE AIR SURGE TANK

15. REMOVE FUEL DELIVERY PIPE

16. REMOVE INJECTOR