FUEL PRESSURE PULSATION DAMPER > REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE COOL AIR INTAKE DUCT SEAL

4. REMOVE ENGINE UNDER COVER

5. DRAIN ENGINE COOLANT

6. REMOVE ENGINE ROOM SIDE COVER RH

7. REMOVE V-BANK COVER

8. DISCONNECT NO. 2 VENTILATION HOSE

9. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

10. DISCONNECT WATER BY-PASS HOSE

11. DISCONNECT UNION TO CHECK VALVE HOSE

12. DISCONNECT VENTILATION HOSE

13. REMOVE INTAKE AIR SURGE TANK

14. REMOVE FUEL PRESSURE PULSATION DAMPER