FUEL INJECTOR > REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE COOL AIR INTAKE DUCT SEAL

4. REMOVE ENGINE UNDER COVER

5. DRAIN ENGINE COOLANT

6. REMOVE ENGINE ROOM SIDE COVER RH

7. REMOVE V-BANK COVER

8. DISCONNECT NO. 2 VENTILATION HOSE

9. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

10. DISCONNECT WATER BY-PASS HOSE

11. DISCONNECT HEATER WATER INLET HOSE

12. REMOVE ENGINE REAR COVER

13. DISCONNECT UNION TO CHECK VALVE HOSE

14. DISCONNECT VENTILATION HOSE

15. DISCONNECT FUEL MAIN TUBE

16. REMOVE INTAKE AIR SURGE TANK

17. REMOVE INTAKE MANIFOLD

18. REMOVE FUEL PRESSURE PULSATION DAMPER

19. REMOVE NO. 1 FUEL PIPE

20. DISCONNECT NO. 2 FUEL PIPE

21. REMOVE HIGH PRESSURE SIDE FUEL PUMP

22. REMOVE NO. 2 FUEL PIPE

23. REMOVE NO. 3 FUEL PIPE

24. REMOVE NO. 2 FUEL DELIVERY PIPE

25. REMOVE NO. 1 FUEL DELIVERY PIPE

26. REMOVE FUEL INJECTOR

27. REMOVE FUEL INJECTOR SEAL