HEATED OXYGEN SENSOR (for Sensor 2) > INSTALLATION

1. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

2. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

5. INSTALL CONSOLE BOX PLATE

6. INSTALL CONSOLE UPPER PANEL ASSEMBLY

7. INSTALL FRONT CONSOLE UPPER GARNISH

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. PERFORM INITIALIZATION