FUEL TANK > INSTALLATION

1. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

2. INSTALL FUEL TANK CUSHION

3. INSTALL FUEL PUMP TUBE SUB-ASSEMBLY

4. INSTALL FUEL TANK SUB-ASSEMBLY

5. CONNECT EMISSION HOSE

6. CONNECT FUEL TANK TO FILLER PIPE HOSE

7. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

8. CONNECT PARKING BRAKE CABLE ASSEMBLY

9. INSTALL REAR SUSPENSION MEMBER BRACE LH

10. INSTALL REAR SUSPENSION MEMBER BRACE RH

11. INSTALL REAR FLOOR SIDE MEMBER COVER LH

12. INSTALL REAR FLOOR SIDE MEMBER COVER RH

13. INSTALL NO. 1 DIFFERENTIAL SUPPORT PROTECTOR

14. INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR

15. INSTALL NO. 2 FUEL TANK PROTECTOR

16. ADJUST PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

17. INSTALL FRONT FLOOR NO. 1 HEAT INSULATOR

18. INSTALL FRONT FLOOR COVER CENTER LH

19. INSTALL EXHAUST PIPE ASSEMBLY

20. INSTALL FUEL RETURN VENT TUBE SUB-ASSEMBLY

21. INSTALL REAR FLOOR SERVICE HOLE COVER

22. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

23. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER

24. INSTALL ROOM NO. 3 PARTITION PAD

25. INSTALL REAR SEAT CUSHION ASSEMBLY

26. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

27. CHECK FOR FUEL LEAKS

28. PERFORM INITIALIZATION