REAR SHOCK ABSORBER > REMOVAL

1. SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

3. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER LH

4. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER RH

5. REMOVE TOOL BOX BOARD

6. REMOVE TOOL BOX

7. REMOVE REAR FLOOR FINISH PLATE

8. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER

9. REMOVE REAR WHEEL

10. REMOVE DIFFERENTIAL NO.2 SUPPORT PROTECTOR

11. REMOVE REAR SUSPENSION MEMBER BRACE

12. REMOVE REAR SUSPENSION NO.2 ARM

13. REMOVE REAR SHOCK ABSORBER CAP

14. REMOVE ABSORBER CONTROL ACTUATOR

15. REMOVE REAR SHOCK ABSORBER WITH COIL SPRING